13888888888

10/25/40/100G Custom

10/25/40/100G Custom

Home > Products > Optical Transceivers > 10/25/40/100G Modules > 10/25/40/100G Custom
  • Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

  • Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

  • Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

  • Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

Description:

Customized 25GBASE-LR SFP28 1310nm 20km Duplex LC/UPC SMF Transceiver Module (Industrial)

Features:

Product Highlights

Built-in Maxim Chip, Max. Power Consumption 1.2W
Tested in Targeted Switch for Superior Performance, Quality, and Reliability
Interoperable with Other IEEE-compliant 25G Interfaces for Seamless Integration
High-speed Connectivity Compliant to IEEE 802.3-2018
FS BOX - Support Real-time Configuration
See more

Specifications

Specifications
Part Number
SFP-25GELR-31-I
Vendor Name
FS
Form Factor
SFP28
Max Data Rate
25.78Gbps
Wavelength
1310nm
Max Cable Distance
20km
Connector
Duplex LC
Media
SMF
Transmitter Type
DFB 1310nm
Receiver Type
PIN
TX Power
-7~2dBm
Receiver Sensitivity
<-11.3dBm
Power Budget
4.3dB
Receiver Overload
2dBm
Power Consumption
≤1.2W
Extinction Ratio
3.5dB
DDM/DOM
Supported
Industrial Temperature Range
-40 to 85°C (-40 to 185°F)
CDR
TX & RX Built-in CDR
FEC Function
Not Support
Protocols
SFF-8402, SFF-8472, MSA SFP+
Warranty
5 Years
Core Size
G.652
Packaging Technology
BOX Packaging

Detailed

Customized 25GBASE-LR SFP28 Industrial Optical Transceiver Module for Data Center and Telecom (SMF, 1310nm, 20km, LC, DOM)

The SFP28 transceiver provides 25GBase-LR throughput up to 20km over single mode fiber (SMF) using a wavelength of 1310nm via an LC duplex connector. Featuring low power consumption, high speed, this 25G transceiver is ideal for 25G Ethernet, telecom, and data center. Each SFP28 transceiver module is individually tested in targeted switch, it is fully compliant with the SFP28 MSA and CPRI standard.
Note: The FS P/N is changed from S28-25GLR20-31-I to SFP-25GELR-31-I, but the product is the same. Only the FS P/N has been changed.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us