13888888888

10G SFP+ for 4G Wireless

10G SFP+ for 4G Wireless

Home > Products > Optical Transceivers > Industrial & Access > 10G SFP+ for 4G Wireless
  • Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

  • Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

  • Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

  • Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

Description:

Ericsson Compatible SFP+ 10G CWDM 1270nm 40km Duplex LC/UPC SMF Transceiver Module For 4G Wireless (Industrial)

Features:

Product Highlights

-40~85°C I-Temp Range and TO Hermetic Package for Harsh Outdoor Environments
Low Latency, Max. Power Consumption 1.8W
Minimize Fiber Costs and Increase Line Capacity of 4G Fronthaul
Support CPRI and eCPRI Wireless and 10GBASE Application
Tested in Accordance with GR-468 for Superior Performance, Quality, and Reliability
See more

Specifications

Specifications
Part Number
CWDM-SFP10G-40-I
Vendor Name
FS
Form Factor
SFP+
Max Data Rate
11.3Gbps
Wavelength
1270nm
Max Cable Distance
40km
Connector
Duplex LC
Optical Components
DFB CWDM
Media
SMF
DOM Support
Yes
TX Power
0~5dBm
Receiver Sensitivity
<-16dBm
Industrial Temperature Range
-40 to 85°C (-40 to 185°F)
Protocols
SFP+ MSA, CPRI, eCPRI, SFF-8431, SFF-8472, RoHS
Notice: When the long reach transceiver is used in short distance transmission, please matched with appropriate attenuator according to the table.
Distance
≤ 5km
≤ 10km
≤ 15km
Attenuator

Detailed

Ericsson Compatible 10G CWDM SFP+ Transceiver Module (SMF, 1270nm, 40km, LC, Industrial, DOM)

Ericsson compatible SFP+ transceiver supports up to 40km link lengths over single-mode fiber (SMF) via an LC duplex connector. This transceiver is compliant with SFF-8431 and SFF-8472 MSA standards. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472, to allow access to real-time operating parameters. With these features, this easy to install, hot swappable transceiver is suitable for 10G Ethernet and 10G SONET/SDH applications.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us