13888888888

200/400/800G/1.6T Custom

200/400/800G/1.6T Custom

Home > Products > Optical Transceivers > Ethernet/RoCE Networking > 200/400/800G/1.6T Custom
  • Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

  • Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

  • Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

  • Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

Description:

Customized 400GBASE-DR4 QSFP-DD 8 x 50G PAM4 1310nm 500m MPO-12/APC SMF SiPh-Based Transceiver Module

Features:

Product Highlights

Built-in Broadcom 7nm DSP Chip, Max. Power Consumption 10W
SiPh-Based Technology for Lower Power, Cost and Higher Density
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Compliant with QSFP-DD MSA CMIS Rev4.1, OIF 56G PAM4 and 100G Lambda MSA
Support 4x 100G Breakout to QSFP-DR-100G
See more

Specifications

Specifications
Part Number
QDD-DR4-400G-Si
Vendor Name
FS
Form Factor
QSFP-DD
Max Data Rate
425Gbps (4x106.25Gb/s)
Wavelength
1310nm
Max Cable Distance
500m
Connector
MPO-12 (APC)
Media
SMF
Transmitter Type
DFB
Receiver Type
PIN
TX Power
-2.9~4.0dBm
Minimum Receiver Power
-5.9dBm
Power Budget
3dB
Receiver Overload
4dBm
Max Power Consumption
10W
Extinction Ratio
3.5dB
DDM/DOM
Supported
Commercial Temperature Range
0 to 70°C (32 to 158°F)
Modulation (Electrical)
8x50G-PAM4
Modulation (Optical)
4x100G-PAM4
DSP
TX and RX
Host FEC
Supported
Protocols
QSFP-DD MSA, IEEE 802.3bs, CMIS 4.1
Warranty
5 Years

Detailed

400GBASE-DR4 QSFP-DD PAM4 1310nm 500m DOM Silicon Photonics Transceiver Module (SMF, 1310nm, 500m, MPO-12, DOM)

QSFP-DD 400GBASE-DR4 silicon photonics transceiver is based on a new state-of-the-art silicon photonics (SiPh) platform. It uses SiPh chips that integrate a number of active and passive optoelectronic components, 3D packaging technology and industry-leading 7nm DSP chips. It is a cost-effective and lower power consumption solution for 400GBASE data center.
The 400GBASE-DR4 silicon photonics module supports link lengths of up to 500m SMF with MPO-12 connector. It is compliant with QSFP-DD MSA, IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP-DR-100G.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us