13888888888

Chassis & Accessories

Chassis & Accessories

Home > Products > Optical Networking > Optical Line System > Chassis & Accessories
  • MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

  • MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

  • MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

  • MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

Description:

MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

Features:

Product Highlights

EDFA Amplifier With an Optimum Gain of 19-25dB
Support C-band 40CH DWDM System
Supports AGC, APC and ACC Operation Modes
Extending the Optical Link Power Budget for Building Long Distance DWDM Solutions
Supports Dynamic Gain Tuning over a 6-dB Range

Specifications

Specifications
Amplifier Type
Pre-Amplifier
Operation Wavelength
C21-C60
Optical Gain
19-25dB
Gain Flatness
1.5dB (Typical)
Input Power
-35dBm~-10dBm
Saturated Output Power
≤15dBm
Noise Figure
5.5dB (Typical)
Optical Connector
LC/UPC
Operation Mode
AGC/APC/ACC
Management
CLI, Telnet, SNMP, FCP MS (WEB)
Operation Temperature
–5 to 55°C (23 to 131°F)
Storage Temperature
-25 to 70°C (-13 to 158°F)
Power Consumption
≤15W
Housing
Pluggable Module (Occupies 1 slot in MS8100 managed chassis)

Detailed

MS8100 OPA1525, 19-25dB Gain DWDM EDFA Pre-Amplifier, 15dBm Output

The MS8100 series EDFA is designed to cost-effectively extend the link power budget for building long-distance DWDM solutions.It amplifies a range of optical solutions starting from a single wavelength to full ITU C-Band 40 DWDM wavelength.


The MS8100 series is a Multi-service Optical Transport Network (MS-OTN) transmission platform dominated by key account services. Based on MS-OTN architecture, the MS8100 series can supports OTN cross-connect, MPLS-TP packet switching and SDH cross-connect, with high integration, full-service access capability and flexible three-core cross-scheduling capability, to meet the needs of multiple services and high network security. It is suitable for applications in telecom operators' core and edge networks, data centers, enterprise networks and WANs, providing high-capacity multi-service transmission requirements. The MS8100 series uses the FCP MS software and supports CLI, Telnet and SNMP managements that enable service configuration and performance monitoring. It is easy to check important data, alarms, reports, and much more on-site or remotely at any time.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us