13888888888

DWDM Multiplexer & OADM

DWDM Multiplexer & OADM

Home > Products > Optical Networking > Multiplexer & OADM > DWDM Multiplexer & OADM
  • 8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

  • 8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

  • 8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

  • 8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

Description:

8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

Features:

Product Highlights

Multiplexing of up to 8 Channels on Single Fiber to Maximize the Using of Existing Fiber
Compatible with ITU Grid and Interconnects with All Optical Networking Products
Expansion Port for Adding Additional Channels and Increasing Capacity
Enables Space-efficient Integration and Hybrid Deployment of DWDM/CWDM within the FMU Chassis
Passive Transparent Multiplexing at Any Rate, Any Service, Including Ethernet, SDH/SONET, Fiber Channel, FTTx, and CATV
See more

Specifications

Specifications
Channel
8 Channels
Wavelength
RX-C21-C35, TX-C22-C36
Special Port
Expansion Port
Technology
TFF (Thin Film Filter)
Insertion Loss
≤4.6dB, 4.2dB Typical
Channel Spacing
100GHz (0.8nm)
Channel Passband
±0.11nm
Passband Ripple
≤0.5dB
Return Loss
≥45dB
Adjacent Channel Isolation
≥30dB
Non-adjacent Channel Isolation
≥40dB
Connector
LC/UPC
Polarization Dependent Loss
≤0.3dB
Polarization Mode Dispersion
≤0.1ps
Max Optical Power
≤500mW (27dBm)
Temperature
Operating: -40 to 85°C (-40 to 185°F)
Storage: -40 to 85°C (-40 to 185°F)
Directivity
≥45dB
Dimensions (HxWxD)
1.73"x8.35"x10.04" (44x212x255mm)
Rack Space
1U ½-width Plug-in Module
Housing
Pluggable Module (Occupies 1 Slot in FMU Chassis)
Note: Insertion Loss is specified with connectors and adapters.

Detailed

8 Channels DWDM Mux Demux, 100GHz C21-C35, with Expansion Port, 4.2dB Typical IL, LC/UPC, Single Fiber, Side-A, FMU Plug-in Module

The 8CH Mux Demux, based on TFF (Thin Film Filter), is a passive DWDM device featuring high density, low loss, and long-haul transmission suitability. It features an expansion port can be used to add additional channels, providing a cost-effective and easily expandable solution. In addition, this unit can be used as either a multiplexer or de-multiplexer (Mux/Demux). It combines 8-channel of DWDM wavelengths into a composite signal and separates the combined DWDM signal into 8-channel individual wavelengths over a single-mode optical fiber. In accordance with the ITU-T G.694.1, it maximizes the capacity of the C-band range. Designed for maximum configuration flexibility, the DWDM Mux Demux can plug directly into the FMU chassis, each module occupying one slot. Moreover, because single fiber Mux/Demux is always used in pairs, this device needs to be used in conjunction with the FMU-MD08EB.


It supports 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G Fiber Channel, FTTx and CATV. When deployed with FS DWDM optical transceivers, OEO, EDFA and OADM modules, the Mux Demux seamlessly enables flexible network architectures ranging from simple point-to-point connections to amplified ring configurations.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us