13888888888

DWDM Multiplexer & OADM

DWDM Multiplexer & OADM

Home > Products > Optical Networking > Multiplexer & OADM > DWDM Multiplexer & OADM
  • 8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

  • 8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

  • 8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

  • 8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

Description:

8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

Features:

Product Highlights

Multiplexing of up to 8 Channels on Single Fiber to Maximize the Using of Existing Fiber
Compatible with ITU Grid and Interconnects with All Optical Networking Products
Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
Expansion Port for Adding Additional Channels and Increasing Capacity
Enables Space-efficient Integration and Hybrid Deployment of CWDM, DWDM, LWDM, OWDM, FAP and MTP Cassettes within the FHD® Chassis
See more

Specifications

Specifications
Channel
8 Channels
Wavelength
C21-C28
Special Port
Monitor, Expansion Port
Technology
TFF (Thin Film Filter)
Insertion Loss
≤3.10dB, 2.75dB Typical
Channel Spacing
100GHz (0.8nm)
Channel Passband
±0.11nm
Passband Ripple
≤0.5dB
Return Loss
≥45dB
Adjacent Channel Isolation
≥30dB
Non-adjacent Channel Isolation
≥40dB
Connector
LC/UPC
Polarization Dependent Loss
≤0.3dB
Polarization Mode Dispersion
≤0.1ps
Max Optical Power
≤500mW (27dBm)
Directivity
≥45dB
Temperature
Operating: -40 to 85°C (-40 to 185°F)
Storage: -40 to 85°C (-40 to 185°F)
Dimensions (HxWxD)
1.38''x4.29''x4.64'' (35x109x118mm)
Rack Space
1U ¼-width Plug-in Module
Housing
Pluggable Module (Occupies 1 Slot in FHD® Chassis)
Note: Insertion Loss is specified with connectors and adapters.

Detailed

8 Channels DWDM Mux or Demux, 100GHz C21-C28, with Monitor and Expansion Port, 2.75dB Typical IL, LC/UPC, Single Fiber, High Density, FHD® Plug-in Module

The 8CH Mux Demux, based on TFF (Thin Film Filter), is a passive DWDM device featuring high density, low loss, and long-haul transmission suitability. A 1% monitor port enables downtime-free troubleshooting, and an expansion port supports channel expansion. In addition, this unit can act as a Mux or Demux. It combines 8-channel of DWDM wavelengths into one composite signal and separates the combined signal into 8 individual wavelengths over a single-mode optical fiber. Compliant with the ITU-T G.694.1, it maximizes the C-band range capacity. Designed for maximum configuration flexibility, the DWDM Mux Demux can plug directly into the FHD® chassis, each module occupying one slot.


It supports 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G Fiber Channel, FTTx and CATV. When deployed with FS DWDM optical transceivers, OEO, EDFA and OADM modules, the Mux Demux seamlessly enables flexible network architectures ranging from simple point-to-point connections to amplified ring configurations.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us