13888888888

DWDM Multiplexer & OADM

DWDM Multiplexer & OADM

Home > Products > Optical Networking > Multiplexer & OADM > DWDM Multiplexer & OADM
  • 16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

  • 16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

  • 16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

Description:

16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

Features:

Product Highlights

Multiplexing of up to 16 Channels on Fiber Pair to Maximize the Using of Existing Fiber
Compatible with ITU Grid and Interconnects with All Optical Networking Products
Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
Expansion and 1310nm Port for Adding Additional Channels and Increasing Capacity
Passive Transparent Multiplexing at Any Rate, Any Service, Including Ethernet, SDH/SONET, Fiber Channel, FTTx, and CATV
See more

Specifications

Specifications
Channel
16 Channels
Wavelength
C37-C52
Special Port
Monitor, Expansion, 1310nm Port
Technology
TFF (Thin Film Filter)
Insertion Loss
≤4.9dB, 4.6dB Typical
Channel Spacing
100GHz (0.8nm)
Channel Passband
±0.11nm
Passband Ripple
≤0.5dB
Return Loss
≥45dB
Adjacent Channel Isolation
≥30dB
Non-adjacent Channel Isolation
≥40dB
Connector
LC/UPC
Polarization Dependent Loss
≤0.3dB
Polarization Mode Dispersion
≤ 0.1ps
Max Optical Power
≤500mW (27dBm)
Directivity
≥45dB
Temperature
Operating: -40 to 85°C (-40 to 185°F)
Storage: -40 to 85°C (-40 to 185°F)
Dimensions (HxWxD)
1.73"x19"x10.28" (44x482.6x261.2mm)
Rack Space
Standard 1U
Housing
FMU 1U Rack Mount
Note: Insertion Loss is specified with connectors and adapters.

Detailed

16 Channels DWDM Mux Demux, 100GHz C37-C52, with Monitor, Expansion and 1310nm Port, 4.6dB IL, LC/UPC, Dual Fiber, FMU 1U Rack Mount

The 16CH Mux Demux, based on TFF (Thin Film Filter), is a passive DWDM device featuring high density, low loss, and long-haul transmission suitability. It includes a 1% monitor port for downtime-free troubleshooting, plus expansion and 1310nm ports for cost-effective channel expansion. In addition, this unit can act as either a Mux or Demux. It combines 16-channel of DWDM wavelengths into one composite signal and separates the combined DWDM signal into 16 individual wavelengths over a pair of single-mode optical fiber. In accordance with the ITU-T G.694.1, it maximizes the capacity of the C-band range.


It supports 1G/10G/25G Ethernet, SDH/SONET, 1/2/4/8/16G Fiber Channel, FTTx and CATV. When deployed with FS DWDM optical transceivers, OEO, EDFA and OADM modules, the Mux Demux seamlessly enables flexible network architectures ranging from simple point-to-point connections to amplified ring configurations.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us