13888888888

InfiniBand 400G/200G HDR

InfiniBand 400G/200G HDR

Home > Products > Optical Transceivers > InfiniBand Networking > InfiniBand 400G/200G HDR
  • 3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

  • 3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

  • 3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

  • 3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

Description:

3m (10ft) NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 4 x 50G PAM4 InfiniBand HDR Active Copper Twinax Cable

Features:

Product Highlights

Qualified for InfiniBand HDR End-to-end Systems
Lowest-latency, Low Insertion Loss, Low Crosstalk, High-speed Interconnect
4x 50G-PAM4 to 4x 50G-PAM4
100% Verified by the Original, Perfectly Compatible with NVIDIA QM8700 Devices
Minimum Bend Radius 33mm for Flexible Routing
See more

Specifications

Specifications
NVIDIA/Mellanox InfiniBand Compatible
MCA1J00-H003E
Vendor Name
FS
Form Factor
QSFP56 to QSFP56
Max. Data Rate
200Gbps
Cable Length
3m (10ft)
Wire AWG
30AWG
Minimum Bend Radius
33mm
Max. Power Consumption
1.5W Per End
Cable Type
Active Twinax
Jacket Material
PVC (OFNR)
Commercial Temperature Range
0 to 70°C (32 to 158°F)
Protocols
IEEE 802.3cd, SFF-8665, QSFP MSA, SFF-8679, SFF-8636, InfiniBand HDR

Detailed

NVIDIA/Mellanox MCA1J00-H003E Compatible 200G QSFP56 InfiniBand HDR DAC Twinax Cable (3-meter, Active, QSFP56 to QSFP56, 30AWG)

The NVIDIA/Mellanox MCA1J00-H003E is an 200Gb/s QSFP56 to 200Gb/s QSFP56 InfiniBand HDR Direct Attached Copper cable. Using the Quad Small Form Factor Pluggable 56 (QSFP56) and contains four high-speed electrical copper pairs, each operating at data rates of up to 50Gb/s. This cable is compliant with QSFP56 MSA (Multi-Source Agreement) and IEEE 802.3cd standards.

DACs offer the lowest latency, so are widely used in data centers to connect servers and GPU compute systems to the top-of-rack (TOR) switches and link spine-to-super-spine switches inside racks over short cable lengths. DACs are also used to create InfiniBand storage fabrics with hard-disk-drive (HDD) and flash memory subsystems.

Featuring a simple design and minimal components, DAC cables offer the lowest-cost, lowest-latency, and near-zero-power connections for high-speed links. They enhance port bandwidth, density, configurability, and reduce power requirements in supercomputers and hyperscale systems.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us