13888888888

OWDM Multiplexer

OWDM Multiplexer

Home > Products > Optical Networking > Multiplexer & OADM > OWDM Multiplexer
  • 8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

  • 8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

  • 8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

  • 8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

Description:

8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

Features:

Product Highlights

Multiplexing of up to 8 Channels on Fiber Pair to Maximize the Using of Existing Fiber
Compatible with ITU Grid and Interconnects with Optical Networking Products
Monitor Port Taps off 1% of the Signal to Monitor the Channel Power Levels
Enables Space-efficient Integration and Hybrid Deployment of CWDM, DWDM, LWDM, OWDM, FAP and MTP Cassettes within the FHD® Chassis
Passive Transparent Multiplexing at Any Rate, Any Service, Including Ethernet, SDH/SONET, Fiber Channel, FTTx, and CATV
See more

Specifications

Specifications
Channel
8 Channels
Wavelength
228.4, 228.6, 228.8, 229.0, 229.2, 229.4, 229.6, 229.8THz
Special Port
Monitor Port
Technology
TFF (Thin Film Filter)
Insertion Loss
≤3.2dB, 3.0dB Typical
Channel Spacing
200GHz (1.6nm)
Channel Passband
±0.2nm
Passband Ripple
≤0.5dB
Return Loss
≥45dB
Adjacent Channel Isolation
≥30dB
Non-adjacent Channel Isolation
≥40dB
Connector
LC/UPC
Polarization Dependent Loss
≤0.3dB
Polarization Mode Dispersion
≤0.1ps
Max Optical Power
≤500mW (27dBm)
Directivity
≥45dB
Temperature
Operating: -40 to 85°C (-40 to 185°F)
Storage: -40 to 85°C (-40 to 185°F)
Dimensions (HxWxD)
1.38''x4.29''x4.64'' (35x109x118mm)
Rack Space
1U ¼-width Plug-in Module
Housing
Pluggable Module (Occupies 1 Slot in FHD® Chassis)
Note: Insertion Loss is specified with connectors and adapters.

Detailed

8 Channels O-band DWDM Mux Demux, 228.4-229.8THz, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber, High Density, FHD® Plug-in Module

The 8CH Mux Demux, based on TFF (Thin Film Filter), is a passive O-band DWDM device featuring high density and low loss. It is integrated with a monitor port. The 1% monitor port allows easy troubleshooting without downtime. In addition, this unit can be used as either a multiplexer or de-multiplexer (Mux/Demux). It combines 8-channel of DWDM wavelengths into a composite signal and separates the combined DWDM signal into 8-channel individual wavelengths over a pair of single-mode optical fiber. Designed for maximum configuration flexibility, the O-band DWDM Mux Demux can plug directly into the FHD® chassis, each module occupying one slot.


It is suitable for short-distance transmission, such as 5G pre-transmission, data center interconnects (DCI), metro access, and point-to-point access networks, with the advantage of low-cost, simplified network architecture, meeting FS customers' short-reach 100G transmission requirements.

Inquiry

Message Box

  • Product Name:  

  • Your Name:  

  • Contact Number:  

  • Email Address:  

  • Message Content:  

Welcome to our online message section!

Please fill out the form on the left; we will contact you as soon as we receive your message.

Contact Us